PDA

View Full Version : Konica 7045


Custom Search


Raymondd
07-03-2008, 12:29 AM
Hello Guys,
Just inherited a konica 7045, copier was jamming and found broken seperator in fuser. We pulled the fuser out w/copier turned on, and now have a F-36-2. I believe this an abnormal fuser temp. According to a DI 850 service manuel.
Does anyone have a service and parts manuel for this model, and a reset for this code?
Any help is greatly apreciated!!!

Ray

JustManuals
07-03-2008, 05:36 AM
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from JustManuals (http://www.justmanuals.com)


Paul@justmanuals.com

shrum1340
07-03-2008, 06:04 AM
You have the 25 mode, 36 mode and the 47 mode.I believe it's...
Hold down the 2 and 5 and power up at the same time.
Push P ,47, P, 0 ,print ,power off.
But you should order the manual to be sure.

Raymondd
07-07-2008, 05:48 PM
Thanks for the help!!! I downloaded manuals from Manuals4u.

Thanks again
Ray

james
07-07-2008, 11:20 PM
Hello Guys,
Just inherited a konica 7045, copier was jamming and found broken seperator in fuser. We pulled the fuser out w/copier turned on, and now have a F-36-2. I believe this an abnormal fuser temp. According to a DI 850 service manuel.
Does anyone have a service and parts manuel for this model, and a reset for this code?
Any help is greatly apreciated!!!

Ray
25 mode, 1(software sw) 1-3, off

james
07-07-2008, 11:22 PM
25 mode, software sw 1, 1-3, choose off, power off

Raymondd
07-08-2008, 12:03 AM
Thanks James it's up and running

Ray

Custom Search