Konica 7045

[Raymondd]

Hello Guys,
Just inherited a konica 7045, copier was jamming and found broken seperator in fuser. We pulled the fuser out w/copier turned on, and now have a F-36-2. I believe this an abnormal fuser temp. According to a DI 850 service manuel.
Does anyone have a service and parts manuel for this model, and a reset for this code?
Any help is greatly apreciated!!!

Ray

[JustManuals]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from JustManuals


Paul@justmanuals.com

[shrum1340]

You have the 25 mode, 36 mode and the 47 mode.I believe it's...
Hold down the 2 and 5 and power up at the same time.
Push P ,47, P, 0 ,print ,power off.
But you should order the manual to be sure.

[Raymondd]

Thanks for the help!!! I downloaded manuals from Manuals4u.

Thanks again
Ray

[james]

Hello Guys,
Just inherited a konica 7045, copier was jamming and found broken seperator in fuser. We pulled the fuser out w/copier turned on, and now have a F-36-2. I believe this an abnormal fuser temp. According to a DI 850 service manuel.
Does anyone have a service and parts manuel for this model, and a reset for this code?
Any help is greatly apreciated!!!

Ray

25 mode, 1(software sw) 1-3, off

[james]

25 mode, software sw 1, 1-3, choose off, power off

[Raymondd]

Thanks James it's up and running

Ray