PDA

View Full Version : bizhub 423 doc feed 621 not feeding certain times


Custom Search


brent
06-30-2016, 05:56 PM
this is wild.. customer stated the doc feeder will work only during scanning and not copying. I'm like what?
but as soon as I tried it.. customer was right so there must be a problem with timing or the gear that
drives the paper feed actuator because during a scan mode they scan twice as fast and the assembly drops down quicker
during a copy mode using the doc feeder it will not drop down thus not working
any thoughts on this? am I over thinking it? help

lol thanks guys

brent

allan
06-30-2016, 06:21 PM
Check if the scanning does the same with the resolution set differently. Test 200X200 300X300 and 400X400.

Synthohol
06-30-2016, 06:31 PM
Ive seen that, try soaking the spring clutch gear in alcohol for a couple minutes and reinstall.
If it wont engage immediately and drop the take up it works just like you see.

brent
06-30-2016, 07:27 PM
ok it was the spring clutch. I should have tried that first. Lol
but I usually overthink these things. The scanner feeds faster do that is why it worked

MVPunisher
07-05-2016, 07:45 PM
Not only can it be the spring clutch, but there are 2 white clutches on that same shaft. I usually replace all 3 as a set and it never comes back.

Custom Search