PDA

View Full Version : Miscellaneous C451 Bypass tray and non working bypass duplex


Custom Search


mike86
07-10-2016, 10:58 PM
Is it possible to use duplex printing while I am using thick 2-3-4 from bypass ?

Working fine while in a tray, but as soon as loaded to bypass, set to it (paper set 2nd side or something like that) and printer simply prints everything as single sided (no matter if double side page from bypass or added cover pages from bypass, no warnins or errors)

Mr Spock
07-10-2016, 11:36 PM
Thick 1 is the only auto duplex setting that should be allowed. Anything else should run side one then run side 2.

mike86
07-10-2016, 11:41 PM
Thick 1 is the only auto duplex setting that should be allowed. Anything else should run side one then run side 2.

So no auto duplex from a bypass :///

Mr Spock
07-11-2016, 02:28 AM
So no auto duplex from a bypass :///

Should be not auto duplex above thick 1 on any tray but....... I have seen the machine do it.

Custom Search