kinica c284

[uzicomp]

Hey
I need help reset the digital counter of c284

[Alex1]

Hey
I need help reset the digital counter of c284

Do you mean the meter reading???

[emujo]

Pull SSD board, place on hard surface, strike with hammer, replace SSD board. This is a much easier process than trying to re write the SSD board or clear the contents and you will get the same "boat anchor" results with less headaches. Emujo

[Synthohol]

Pull SSD board, place on hard surface, strike with hammer
putting the ssd board in the microwave for 15 seconds works better ;)

[uzicomp]

it is reset the digital counter of c284?

[uzicomp]

putting the ssd board in the microwave for 15 seconds works better ;)



Very funny
If you do not have anything clever to say then it is better to keep quiet

[Alex1]

it is reset the digital counter of c284?

You can't reset the digital counter

[Synthohol]

it's totally immoral and in some places illegal.
like turning back the odometer of a car for sale.
this is why we all will make fun of this request.

[allan]

You could try using whiteout on the touch screen?

[uzicomp]

it's totally immoral and in some places illegal.
like turning back the odometer of a car for sale.
this is why we all will make fun of this request.

I do not intend to cheat someone
When I rent a client machine
I wanted to charge him to begin meter counter to 0

[uzicomp]

You could try using whiteout on the touch screen?

nop

[Kidaver]

33746

[kingarthur]

Reverse the polarity of the motors, fill up the exit tray & run it backwards.......:D

[uzicomp]

Reverse the polarity of the motors, fill up the exit tray & run it backwards.......:D


How I did not think about it you're a genius;);););)

[allan]

Reverse the polarity of the motors, fill up the exit tray & run it backwards.......:D

How on earth are you going to separate the color toner?

[emujo]

Very funny
If you do not have anything clever to say then it is better to keep quiet


If you can only ask stupid questions, the it is better for you to not ask. Emujo

[emujo]

Yesterday I could not spell "Konica", now I am a dealer, but I still can't spell... You goof, when you put a used device out for a customer, you say "your meter starts at 22,342 and you will be charged for every copy/print over this meter". Emujo

[Albonline]

Very funny
If you do not have anything clever to say then it is better to keep quiet


If you ask a crooked question you will get a crooked answer.

[tech51]

I do not intend to cheat someone
When I rent a client machine
I wanted to charge him to begin meter counter to 0

The plain and simple fact is you cannot reset the print counters on KonicaMinolta machines.

There is no procedure for it that I know of and even if I did I wouldn't tell anyone as I wish to keep my job!

Time to end this thread?

[emujo]

No way, keep shaming him if he tries to justify his post...BTW, if you had led with "I want to put a used MFP out, but I don't want the customer to see the 500K clicks on the meter, can I hide this or reset it" you would still get the same answer, but we would have been a lot nicer about it. Emujo

PS I need to copy money, can someone tell me how to do it? LOL

[Albonline]

No way, keep shaming him if he tries to justify his post...BTW, if you had led with "I want to put a used MFP out, but I don't want the customer to see the 500K clicks on the meter, can I hide this or reset it" you would still get the same answer, but we would have been a lot nicer about it. Emujo

PS I need to copy money, can someone tell me how to do it? LOL

You ALREADY know how to copy money.

[Kidaver]

No way, keep shaming him if he tries to justify his post...BTW, if you had led with "I want to put a used MFP out, but I don't want the customer to see the 500K clicks on the meter, can I hide this or reset it" you would still get the same answer, but we would have been a lot nicer about it. Emujo

PS I need to copy money, can someone tell me how to do it? LOL

33752

[Synthohol]

just document the starting meter(s) we sell refurbs all the time and the starting meter is what it is.
use one of these ;)
33753

[peter42]

Customer gets rental MFP.
Meter count is on delivery paper.
This is customers zero point.
From here we charge customer.
Whats the problem?

Dont let tecnicians and marketers discuss those stuff, tecnician will loose,
except he presents bulletin from manufacturer.
For extremly renitend marketers, konvert bulletin.pdf into bulletin.powerpoint. 😈

[prabinkumar]

I do not intend to cheat someone
When I rent a client machine
I wanted to charge him to begin meter counter to 0
Since it is a used machine, Ethically it is not recommended to reset.