View Full Version : kinica c284
uzicomp
08-04-2016, 05:23 PM
Hey
I need help reset the digital counter of c284
Alex1
08-04-2016, 05:57 PM
Hey
I need help reset the digital counter of c284
Do you mean the meter reading???
emujo
08-04-2016, 07:37 PM
Pull SSD board, place on hard surface, strike with hammer, replace SSD board. This is a much easier process than trying to re write the SSD board or clear the contents and you will get the same "boat anchor" results with less headaches. Emujo
Synthohol
08-04-2016, 11:36 PM
Pull SSD board, place on hard surface, strike with hammer
putting the ssd board in the microwave for 15 seconds works better ;)
uzicomp
08-05-2016, 08:17 AM
it is reset the digital counter of c284?
uzicomp
08-05-2016, 08:21 AM
putting the ssd board in the microwave for 15 seconds works better ;)
Very funny
If you do not have anything clever to say then it is better to keep quiet
Alex1
08-05-2016, 08:54 AM
it is reset the digital counter of c284?
You can't reset the digital counter
Synthohol
08-05-2016, 11:08 AM
it's totally immoral and in some places illegal.
like turning back the odometer of a car for sale.
this is why we all will make fun of this request.
allan
08-05-2016, 12:56 PM
You could try using whiteout on the touch screen?
uzicomp
08-05-2016, 01:13 PM
it's totally immoral and in some places illegal.
like turning back the odometer of a car for sale.
this is why we all will make fun of this request.
I do not intend to cheat someone
When I rent a client machine
I wanted to charge him to begin meter counter to 0
uzicomp
08-05-2016, 01:15 PM
You could try using whiteout on the touch screen?
nop
Kidaver
08-05-2016, 03:01 PM
33746
kingarthur
08-05-2016, 03:20 PM
Reverse the polarity of the motors, fill up the exit tray & run it backwards.......:D
uzicomp
08-05-2016, 04:30 PM
Reverse the polarity of the motors, fill up the exit tray & run it backwards.......:D
How I did not think about it you're a genius;);););)
allan
08-05-2016, 05:03 PM
Reverse the polarity of the motors, fill up the exit tray & run it backwards.......:D
How on earth are you going to separate the color toner?
emujo
08-05-2016, 05:18 PM
Very funny
If you do not have anything clever to say then it is better to keep quiet
If you can only ask stupid questions, the it is better for you to not ask. Emujo
emujo
08-05-2016, 05:23 PM
Yesterday I could not spell "Konica", now I am a dealer, but I still can't spell... You goof, when you put a used device out for a customer, you say "your meter starts at 22,342 and you will be charged for every copy/print over this meter". Emujo
Albonline
08-05-2016, 06:26 PM
Very funny
If you do not have anything clever to say then it is better to keep quiet
If you ask a crooked question you will get a crooked answer.
tech51
08-05-2016, 06:47 PM
I do not intend to cheat someone
When I rent a client machine
I wanted to charge him to begin meter counter to 0
The plain and simple fact is you cannot reset the print counters on KonicaMinolta machines.
There is no procedure for it that I know of and even if I did I wouldn't tell anyone as I wish to keep my job!
Time to end this thread?
emujo
08-05-2016, 06:56 PM
No way, keep shaming him if he tries to justify his post...BTW, if you had led with "I want to put a used MFP out, but I don't want the customer to see the 500K clicks on the meter, can I hide this or reset it" you would still get the same answer, but we would have been a lot nicer about it. Emujo
PS I need to copy money, can someone tell me how to do it? LOL
Albonline
08-05-2016, 07:05 PM
No way, keep shaming him if he tries to justify his post...BTW, if you had led with "I want to put a used MFP out, but I don't want the customer to see the 500K clicks on the meter, can I hide this or reset it" you would still get the same answer, but we would have been a lot nicer about it. Emujo
PS I need to copy money, can someone tell me how to do it? LOL
You ALREADY know how to copy money.
Kidaver
08-05-2016, 07:16 PM
No way, keep shaming him if he tries to justify his post...BTW, if you had led with "I want to put a used MFP out, but I don't want the customer to see the 500K clicks on the meter, can I hide this or reset it" you would still get the same answer, but we would have been a lot nicer about it. Emujo
PS I need to copy money, can someone tell me how to do it? LOL
33752
Synthohol
08-05-2016, 10:41 PM
just document the starting meter(s) we sell refurbs all the time and the starting meter is what it is.
use one of these ;)
33753
peter42
08-06-2016, 12:02 PM
Customer gets rental MFP.
Meter count is on delivery paper.
This is customers zero point.
From here we charge customer.
Whats the problem?
Dont let tecnicians and marketers discuss those stuff, tecnician will loose,
except he presents bulletin from manufacturer.
For extremly renitend marketers, konvert bulletin.pdf into bulletin.powerpoint. 😈
prabinkumar
04-26-2017, 04:54 PM
I do not intend to cheat someone
When I rent a client machine
I wanted to charge him to begin meter counter to 0
Since it is a used machine, Ethically it is not recommended to reset.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.