View Full Version : C352 - Where to Set Installed Place
I have set up a C352 to send status notifications (misfeeds ect) by email which works fine except the "Installed Place" line doesnt have the location. Its Blank - so I have no idea what machine is having a problem.
I have looked through all of the webpage and cant seem to find where to set it.
Anyone know where it is?
Thanks
B0265
07-09-2008, 07:22 AM
It's under Maintenance > Machine Setting.
copierlooser
07-09-2008, 11:52 AM
Your machine has to be at certain level and capable of sending email. The status notification is under Networks settings>Detail Settings>Status Notifications.
It's under Maintenance > Machine Setting.
Sorry, made a mistake. Its a C253.
I still cant find where to set this. Is it on the Web page or on the Machine itself?
and again, the email does work - its just the location line in the email itself thats blank
It's under Maintenance > Machine Setting.
ok- got there but the name/location is filled out properly. I deleted it and tried a different name but same results. blank on the email.
Could this be a firmware issue?
blurr
07-09-2008, 06:55 PM
Machine settings-machine name
network settings-smtp server at once must be ok
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.