Synaux
08-12-2016, 06:31 AM
12x18 in tray 3,4 and bypass is always recognized as A3.
When I put anything in bypass, the only standard paper sizes are A or B sizes we want standard inch sizes.
Marketing has been set to US. I cannot seem to find any other settings for this. There is "tray"calibration in Service Mode but not available for bypass.
Someone please point out the obvious that I am missing...
When I put anything in bypass, the only standard paper sizes are A or B sizes we want standard inch sizes.
Marketing has been set to US. I cannot seem to find any other settings for this. There is "tray"calibration in Service Mode but not available for bypass.
Someone please point out the obvious that I am missing...