PDA

View Full Version : Bizhub 363 Fusing Lamp


Custom Search


richmods
08-25-2016, 07:23 PM
I was wondering if anyone has had any luck finding the heat lamp for this model fuser. I currently have one with a busted element and would like to order just the lamp as the rest of the fuser is just fine. If anyone one knows of or has a supplier I would be greatfull if you would share that info. Thanks in advance.

copyman
08-25-2016, 08:47 PM
Did you try buying a used fuser on Ebay, etc. You can use lamp from any machine in that series, Biz 223,282,363,423.

Not sure but may be able to use a lamp from the Biz 200 series.

richmods
08-25-2016, 09:30 PM
Did you try buying a used fuser on Ebay, etc. You can use lamp from any machine in that series, Biz 223,282,363,423.

Not sure but may be able to use a lamp from the Biz 200 series.

have one on the way...actually had a lamp in the shop but it was broken as well. I don't have many of these in the field so I don't carry many spare parts for this model.

Don N.
08-27-2016, 09:11 PM
Did you try buying a used fuser on Ebay, etc. You can use lamp from any machine in that series, Biz 223,282,363,423.

Not sure but may be able to use a lamp from the Biz 200 series.
Lamp ends and holders are physically different, but if we keep getting these lamps opening a filament, I may dremel the holder to fit an older model lamp with similar wattage and splice in.
Love to hear about any other's success?

Custom Search