Drum unit to be changed

[karthik2808]

Dear All,

Am using Konica minolta bizhub C224 model, it showing some error like "Y drum unit to be replaced". But i have bought new one and inserted.
But the issue remains the same. The error message is not going at all.
Please guide me to kill this issue.

Thanks in advance.

Regards,
Karthik

[Synthohol]

was it a real OEM drum unit or did you just replace the cylinder?
the new? chip did not communicate to the machine. check the gold terminals on the copier.

[karthik2808]

was it a real OEM drum unit or did you just replace the cylinder?
the new? chip did not communicate to the machine. check the gold terminals on the copier.


Thanks for your response. will try it and tell you the status.

Regards,
Karthik