PDA

View Full Version : Fax Settings Issue


Custom Search


kmNoob
09-13-2016, 08:49 PM
Hi all! I am having an issue with a Bizhub 363, in which, the fax settings are hidden from view. You can view fax settings in service mode, however, the fax settings in admin mode have disappeared. I believe that there is some sort of security feature on the machine, because when you try to send a fax, the fax kit does not dial out and when you check the Job List, it says "fax complete," even if nothing was sent. Maybe there is a setting on Enhanced Security mode or possibly the Limiting Access to Destination tab has settings on there. Either way, I am not quite sure what to do to fix this issue, but any help would be appreciated.

Synthohol
09-13-2016, 08:56 PM
follow the install instructions again from scratch, let us know.

copyrooks
09-13-2016, 10:29 PM
look for a setting called prefix/suffix and shut it off. Had a very strange 227 that wouldn't fax, as soon as i typed the number it would send as a smb scan. after replacing the fax kit and a few days finally called KMBS and they told me about the prefix/suffix setting from what i described to them. Good luck hope this helps

mx6turbo89
09-13-2016, 11:37 PM
Ensure that the HDD is turned on in the service mode.

Custom Search