Biz hub 654

[antone]

Trouble code 9401....replaced CCD..code gone,but 3/4 copy black.Any I can do...firmware updated

Sent from my SM-N920V using Tapatalk

[allan]

Have a look.

Better to search the site this way.

https://www.google.com/search?sclient=psy-ab&client=firefox-b-ab&q=site:www.copytechnet.com++654+C-9401&oq=site:www.copytechnet.com++654+C-9401&gs_l=serp.3...21048.26082.0.26451.11.8.3.0.0.0.412 .2160.2-7j0j1.8.0....0...1c.1.64.psy-ab..3.0.0.cJ4rFqDc990&pbx=1&bav=on.2,or.r_cp.&bvm=bv.133700528,d.ZGg&biw=1920&bih=947&ech=1&psi=vqTmV5rLFoObgAbl17KQAw.1474733245380.3&ei=vqTmV5rLFoObgAbl17KQAw&emsg=NCSR&noj=1&gfe_rd=cr

[blackcat4866]

I'm thinking that you turned the wrong screws when installing the CCD. The painted screws are to focus the CCD, and most likely you changed that focus. =^..^=

[EarthKmTech]

We have had some faulty out of the box CCD's lately.

Last one had about 1/2 inch skew off the glass on install, the original faulty was put back in and perfect but S-1. (probably dropped in transit)

replaced with another new one, no more problems.

[blackcat4866]

http://www.copytechnet.com/forums/konica-minolta/108746-bizhub-423-focus.html

Does it look like this?:

34232

=^..^=

[antone]

We have had some faulty out of the box CCD's lately.

Last one had about 1/2 inch skew off the glass on install, the original faulty was put back in and perfect but S-1. (probably dropped in transit)

replaced with another new one, no more problems.
Yes same thing!

Sent from my SM-N920V using Tapatalk