PDA

View Full Version : ineo +454e tray problem


Custom Search


jakani
09-28-2016, 06:59 PM
hello everybody

i have a problem with tray 1 in ineo+454e machine i could not change the type of paper or print out recto verso using it , it only prints recto prints

as you see here there is a type of paper selected but i can't change it !!

34263

when i select tray 1 to change settings i couldn't as you can see :

34264

but the other tray works just fine !!

34265


any suggestion would be appreciated i have the same problem in two machines i tried updating firmware in one of theme but with no luck in fixing this !

habik
09-28-2016, 07:31 PM
Trouble reset
Firmware update
Disconnect network cable and reboot and try again.

Byting on bits.

habik
09-28-2016, 07:32 PM
Top it up with paper and try then.. Just a thought.

Byting on bits.

jakani
09-29-2016, 09:55 AM
Trouble reset
Firmware update
Disconnect network cable and reboot and try again.

Byting on bits.

thank you for you answer

i tried firmware update only no luck , but i will give it another try and trouble reset


Top it up with paper and try then.. Just a thought.

Byting on bits.

anything helpful , i will try that too

EarthKmTech
09-30-2016, 06:44 AM
thats a soft switch setting that has been incorrectly configured.

Print off a list of soft switch settings and compare with another one that works fine.
Alternatively initializing the machine may restore it to correct operation.

OR someone has been stuffing around with custom panel

Custom Search