PDA

View Full Version : Konica Minolta bizhub c451 CE password lost!


Custom Search


matsan_offset@yahoo.com
10-01-2016, 11:07 AM
Hi
I bought a used device Konica minolta bizhub c451.
previous service, put password CE service mode
They do not give us the password
If you install new firmware, password Is deleted?


Can you help me with this?


Where can I find the firmware you give me a link.




ROM Version
MFP Controller BOOT Program A00J0Y0-1E00-G00-05(00)
MFP Controller SubSet Program A00J0Y0-1F00-G00-70(00)
MFP Controller A00J0Y0-0100-G00-R5(00)
Operation PANEL Message Data A00J0Y0-8100-G00-K1
FAX Board Controller1
FAX Board Controller2
IR A00J0Y0-0023-G00-34
PRT A00J0Y0-0050-G00-22
ADF A01H0Y0-0024-G00-12
Finisher A01G0Y0-0071-G01-01
RU
ZU
Panel Micro-Computer A02E0Y0-8900-G00-00
Loadable Device Driver
System Controller A00J0Y0-1000-G00-R5(00)
Printer Controller A00J0Y0-3000-G00-75(00)
Printer Controller-Font A00J0Y0-3F00-G00-22(00)
Printer Controller-Demo Page A00J0Y0-3E00-G00-00
MIO A00J0Y0-5000-G00-80(00)
PSWC A00J0Y0-5100-G00-06(00)
MIB IF A00J0Y0-5200-G00-J1(00)
IPP IF A00J0Y0-5300-G00-82(00)
External Controller IF
TCP/Socket A00J0Y0-6300-G00-J2(00)
Open API A00J0Y0-7000-G00-11(00)
Operation PANEL A00J0Y0-8000-GMO-30
CSRC A00J0Y0-8300-G00-80(00)
PIC A00J0Y0-8200-G01-23




Thanks

mx6turbo89
10-01-2016, 03:54 PM
Rewriting firmware will not delete or change the CE Password. If the current password is not the default 92729272, then you'll have to contact KM to get it reset.

tonyligz
10-01-2016, 03:55 PM
Hi
I bought a used device Konica minolta bizhub c451.
previous service, put password CE service mode
They do not give us the password
If you install new firmware, password Is deleted?


Can you help me with this?


Where can I find the firmware you give me a link.




ROM Version
MFP Controller BOOT Program A00J0Y0-1E00-G00-05(00)
MFP Controller SubSet Program A00J0Y0-1F00-G00-70(00)
MFP Controller A00J0Y0-0100-G00-R5(00)
Operation PANEL Message Data A00J0Y0-8100-G00-K1
FAX Board Controller1
FAX Board Controller2
IR A00J0Y0-0023-G00-34
PRT A00J0Y0-0050-G00-22
ADF A01H0Y0-0024-G00-12
Finisher A01G0Y0-0071-G01-01
RU
ZU
Panel Micro-Computer A02E0Y0-8900-G00-00
Loadable Device Driver
System Controller A00J0Y0-1000-G00-R5(00)
Printer Controller A00J0Y0-3000-G00-75(00)
Printer Controller-Font A00J0Y0-3F00-G00-22(00)
Printer Controller-Demo Page A00J0Y0-3E00-G00-00
MIO A00J0Y0-5000-G00-80(00)
PSWC A00J0Y0-5100-G00-06(00)
MIB IF A00J0Y0-5200-G00-J1(00)
IPP IF A00J0Y0-5300-G00-82(00)
External Controller IF
TCP/Socket A00J0Y0-6300-G00-J2(00)
Open API A00J0Y0-7000-G00-11(00)
Operation PANEL A00J0Y0-8000-GMO-30
CSRC A00J0Y0-8300-G00-80(00)
PIC A00J0Y0-8200-G01-23




Thanks




I have to reset nvram the firmware, provide your email address to me!

matsan_offset@yahoo.com
10-01-2016, 04:36 PM
I have to reset nvram the firmware, provide your email address to me!
matsan_offset@yahoo.com

matsan_offset@yahoo.com
10-02-2016, 10:20 AM
I have to reset nvram the firmware, provide your email address to me!



Waiting Impatiently :)

matsan_offset@yahoo.com

thanks

copier tech
10-02-2016, 11:29 AM
34289


There is an NVRAM reset firmware available this will reset the service password.

habik
10-02-2016, 08:42 PM
Yup there is one :)


Sent from my iDon't believe in marketing device using Tapatalk

mx6turbo89
10-03-2016, 02:26 AM
34289


There is an NVRAM reset firmware available this will reset the service password.

Did not know about this, thanks.

Custom Search