houseec
10-02-2016, 09:15 AM
i have bizhub c35 when amake copy take time 1to 2 minute then light switch then copy delay each copy
jotunn
10-02-2016, 08:06 PM
Update the firmware - I had the same problem recently.
Imsdal
10-03-2016, 08:51 AM
Hello
Does it show on the display "calibrating" cause if the machine show that and it takes too long, it might be the laser that is dirty, just clean it with that tool from the paper tray.
Imsdal
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.