View Full Version : C500 color problem
kopykatky
07-17-2008, 07:31 PM
I have a C500 that when you print or copy reflux blue the half tones look purple. I did all the system updates and calibrations on the machine and the fiery controller. any suggestions.
Did you checked the magenta IU? I think it is overtone.
Specilist KVN
09-12-2008, 07:06 PM
I have a C500 that when you print or copy reflux blue the half tones look purple. I did all the system updates and calibrations on the machine and the fiery controller. any suggestions.
Reflex blue is a classic problem colour, even on a Press.
Do you have the Spot-on option on your Fiery?
Here you can find the colour and reduce the magenta in that specific spot colour.
Also, are you sending it as a spot or a process colour?
Try using a different simulation profile in the expert colour settings.
I demo and train people on these units and refelx is my example colour to show how to use spot on.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.