Lokertr
11-05-2016, 02:55 AM
Hey guys, I just wound up with a C350, IC401, and FS-601 with extra toner and such. I did have to make a minor repair to the solenoid in horizontal transport unit, otherwise it was just cleaning the print heads and such.
One thing I am struggling with is the document feeder jams when you try to duplex. Well it doesn't appear to jam, it stops after getting the first sheet halfway across the glass. It claims it has a misfeed in 3 different spots on the feeder. No marking or tearing on paper...it is not getting caught anywhere...it just decides it's jammed.
Single sided copies it can feed through just fine.
One thing I am struggling with is the document feeder jams when you try to duplex. Well it doesn't appear to jam, it stops after getting the first sheet halfway across the glass. It claims it has a misfeed in 3 different spots on the feeder. No marking or tearing on paper...it is not getting caught anywhere...it just decides it's jammed.
Single sided copies it can feed through just fine.