kmbit
11-05-2016, 03:53 PM
Good Morning All,
I have a OLD KM 282 at a small private school that I provide pro bona support from an IT perspective. I was trying to get this setup to scan to SMB and Email and in the process of trying to get it to work for Email I enabled TSL/SSL and generated a Certificate. That is when the copier started to respond first with the error that the certificate was wrong or invalid but the browser allow for the option to connect anyways - so I did - and now I get the error "405 Method Not Allowed"
Short of doing a factory reset on this unit - any advice on how to bypass this issue to get in and delete the certificate? if doing the factory reset is the answer can someone tell me how to go about doing that on the 282 - and what I then need to configure.
I also read about a "service code" that is 8 zeros, is this the same as the admin password ( from the web interface ) or a separate code?
Thanks for any guidance you can provide.
have a great weekend -
I have a OLD KM 282 at a small private school that I provide pro bona support from an IT perspective. I was trying to get this setup to scan to SMB and Email and in the process of trying to get it to work for Email I enabled TSL/SSL and generated a Certificate. That is when the copier started to respond first with the error that the certificate was wrong or invalid but the browser allow for the option to connect anyways - so I did - and now I get the error "405 Method Not Allowed"
Short of doing a factory reset on this unit - any advice on how to bypass this issue to get in and delete the certificate? if doing the factory reset is the answer can someone tell me how to go about doing that on the 282 - and what I then need to configure.
I also read about a "service code" that is 8 zeros, is this the same as the admin password ( from the web interface ) or a separate code?
Thanks for any guidance you can provide.
have a great weekend -