Gabriel
11-09-2016, 10:21 PM
Bizhub C552 error code C-8102
Turn around pressure welding alienation trouble
In service mode I initialize the error but the error is coming backback,
I replaced the A0HT R710 00 Motor Ass'y and still same problem
the pressure rollers are in the Home position and when the error is initialized (service mode)
the pressure rollers push/release each other and machine shows the C8102 error again
Any help is welcome
Turn around pressure welding alienation trouble
In service mode I initialize the error but the error is coming backback,
I replaced the A0HT R710 00 Motor Ass'y and still same problem
the pressure rollers are in the Home position and when the error is initialized (service mode)
the pressure rollers push/release each other and machine shows the C8102 error again
Any help is welcome