PDA

View Full Version : c-e301 error when printing demo page or configuration page


Custom Search


jakani
11-12-2016, 12:54 PM
hello ,

i have this ineo 454e that it has been used just for copy and its counter reached 1 800 000 , so i wanted to change it with another one and use it in small department as a printer

now to the problem it prints the counter without any problem but the demo page and configuration page i get this error c-e301 , when copying it works just fine !

in the manual it says that its a MFPB problem !

have you ever faced this error ? does it make a problem if i used it as a printer ?

thank you very much

Woxner
11-12-2016, 04:43 PM
Code: CE301Install the following special firmware firmware.


bizhub 224e/284e/364e/454e/554e/ - firmware version GD2-K6.
Bizhub C224e/C284e/C364e/C454e/C554e - firmware version GD2-K6
bizhub 654e/754e - firmware version GD2-K7
bizhub c654e/C754e firmware version - GD2-K7
bizhub C224/C284/C364/C454/C554/C654/C754 - firmware version GDG-72



If it is already at this reload it may be getting corrupt

jakani
11-14-2016, 11:29 AM
Code: CE301Install the following special firmware firmware.


bizhub 224e/284e/364e/454e/554e/ - firmware version GD2-K6.
Bizhub C224e/C284e/C364e/C454e/C554e - firmware version GD2-K6
bizhub 654e/754e - firmware version GD2-K7
bizhub c654e/C754e firmware version - GD2-K7
bizhub C224/C284/C364/C454/C554/C654/C754 - firmware version GDG-72



If it is already at this reload it may be getting corrupt



thank you for replying , but i dont have this special firmware

can anybody send me this firmware at jakani.m@infinity.ma
thank you

jakani
11-17-2016, 10:45 AM
Code: CE301

Install the following special firmware firmware.


bizhub 224e/284e/364e/454e/554e/ - firmware version GD2-K6.
Bizhub C224e/C284e/C364e/C454e/C554e - firmware version GD2-K6
bizhub 654e/754e - firmware version GD2-K7
bizhub c654e/C754e firmware version - GD2-K7
bizhub C224/C284/C364/C454/C554/C654/C754 - firmware version GDG-72



If it is already at this reload it may be getting corrupt



thank you again

i installed firmware G20-J6 and it solved the problem
this firmware Fixed some issues of CE301 :

*If printing a specific PDF file, C-E301 occurs.
*C-E301 will occur when printing a specific file from Adobe Illustrator selecting 3x3 for the Combination
*C-E301(detail codes:0xC271) may occur.

Custom Search