View Full Version : c-e301 error when printing demo page or configuration page
jakani
11-12-2016, 12:54 PM
hello ,
i have this ineo 454e that it has been used just for copy and its counter reached 1 800 000 , so i wanted to change it with another one and use it in small department as a printer
now to the problem it prints the counter without any problem but the demo page and configuration page i get this error c-e301 , when copying it works just fine !
in the manual it says that its a MFPB problem !
have you ever faced this error ? does it make a problem if i used it as a printer ?
thank you very much
Woxner
11-12-2016, 04:43 PM
Code: CE301Install the following special firmware firmware.
bizhub 224e/284e/364e/454e/554e/ - firmware version GD2-K6.
Bizhub C224e/C284e/C364e/C454e/C554e - firmware version GD2-K6
bizhub 654e/754e - firmware version GD2-K7
bizhub c654e/C754e firmware version - GD2-K7
bizhub C224/C284/C364/C454/C554/C654/C754 - firmware version GDG-72
If it is already at this reload it may be getting corrupt
jakani
11-14-2016, 11:29 AM
Code: CE301Install the following special firmware firmware.
bizhub 224e/284e/364e/454e/554e/ - firmware version GD2-K6.
Bizhub C224e/C284e/C364e/C454e/C554e - firmware version GD2-K6
bizhub 654e/754e - firmware version GD2-K7
bizhub c654e/C754e firmware version - GD2-K7
bizhub C224/C284/C364/C454/C554/C654/C754 - firmware version GDG-72
If it is already at this reload it may be getting corrupt
thank you for replying , but i dont have this special firmware
can anybody send me this firmware at jakani.m@infinity.ma
thank you
jakani
11-17-2016, 10:45 AM
Code: CE301
Install the following special firmware firmware.
bizhub 224e/284e/364e/454e/554e/ - firmware version GD2-K6.
Bizhub C224e/C284e/C364e/C454e/C554e - firmware version GD2-K6
bizhub 654e/754e - firmware version GD2-K7
bizhub c654e/C754e firmware version - GD2-K7
bizhub C224/C284/C364/C454/C554/C654/C754 - firmware version GDG-72
If it is already at this reload it may be getting corrupt
thank you again
i installed firmware G20-J6 and it solved the problem
this firmware Fixed some issues of CE301 :
*If printing a specific PDF file, C-E301 occurs.
*C-E301 will occur when printing a specific file from Adobe Illustrator selecting 3x3 for the Combination
*C-E301(detail codes:0xC271) may occur.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.