PDA

View Full Version : KonicaMinolta machines, automatic duplex scanning?


Custom Search


Hansoon
11-15-2016, 11:13 AM
Customer wants to change to a full paperless office. He has two BH-C-280 but is intending to replace them both because now he wants that originals are being scanned both sides automatically and preferably that empty pages are automatically excluded.

Which of the newer or latest bizhub color machines can do this?

Thanks

Hans

allan
11-15-2016, 11:31 AM
C368 with DF-704.
standard with the 45 ppm and up.

copyman
11-15-2016, 12:23 PM
If you are looking for off lease the "4" series has 2 feeders DF-624 (single side) DF-701 (Dual scan). Many of the off lease models C224's, etc I buy have the dual scan feeder installed.

Hansoon
11-15-2016, 04:09 PM
Thanks guys, do machines equipped with that DF-701 skip automatically an empty page?

Hans

copyman
11-15-2016, 05:26 PM
If I remember correctly when I was scanning some personal documents with a DF-701 in the shop it didn't recognize a blank document. If the originals were only one sided it didn't show the blank side when you looked at scans back at computer.

Maybe someone else will confirm.

EarthKmTech
11-16-2016, 12:08 PM
blank page removal and duplex scanning can be turned on by default yes. Have plenty set that way.

Set the expectations though that its not fool proof, anything at all on that blank page and it wont be skipped.

On some 4 machines it doesn't even work at all unless the 2nd side automatic calibration is disabled.

Don N.
01-29-2017, 04:20 AM
EarthKMTech- You said "On some 4 machines it doesn't even work at all unless the 2nd side automatic calibration is disabled."

I have a 224e with DF701 that will blank page delete every time on black, but not on auto or full color. Firmware is the latest (G00-K6). The blank side is clean white. Tried various DPI and text vs text/photo. no luck. It's late. I'm going to clean the optics tomorrow. Where is this "second side auto cal." you mention?

Thanks!

Don N.
01-29-2017, 04:52 AM
OK Found a bulletin at KMBS KBA01500855

SOLUTION: To set CCD Calibration Back Side to OFF, perform the following.


1. Press Menu.
2. Press Counter.
3. Select Display Keypad.
4. Press Stop "00" Stop "01".
5. Enter using the numeric keypad "9272" 4 times. Press END (MINE DOESN'T REQUIRE STEP 5)

6. Select System 2.
7. Select CCD Calibration.
8. Select Back Side and set to OFF.

After power cycling the copier, that fixed it!
THANKS VERY MUCH!

Don N.
01-29-2017, 04:57 AM
A customer can use Adobe Acrobat to blank page delete instead of the scanner:


https://answers.acrobatusers.com/how-would-I-delete-all-blank-pages-at-once-in-a-document-q162915.aspx



https://mail.google.com/mail/u/1/?ui=2&ik=60af6b067f&view=fimg&th=15993e1b882551be&attid=0.1&disp=emb&realattid=ii_15993dde681853b0&attbid=ANGjdJ8JRKGg8RZaIUrKGge4Dng_56LbzNsnsJY_s_i NGp9WQTTgrmTHsEPv6WocXCstKM27nzlXcEHRr-uB7Wh3uF0lCfyxxK8ogKSUgZSPiYeYf1o9NCp4aCmonJo&sz=w956-h1124&ats=1485666033105&rm=15993e1b882551be&zw&atsh=1

Custom Search