PDA

View Full Version : FS534 Jammed stapler cartridge. FYI


Custom Search


habik
11-20-2016, 09:25 PM
Had a cartridge stuck and couldn't get it out by turning the clincher mechanism both ways. So to release it I used a piece of mylar to stick it under.
First you pull cartridge out to the max, then slide the mylar under cca 70mm then push the cartridge with the mylar together all the way in cca 80mm then slide out as usual. See pic below
The culprit is the feed tong that wont remain in the "No feed position"
http://uploads.tapatalk-cdn.com/20161120/919673485edfa323b1000c20199ff8b3.jpg

Byting on bits.

blackcat4866
11-20-2016, 11:20 PM
I've done the same thing with my pocket scale (150mm ruler). =^..^=

Custom Search