PDA

View Full Version : Help needed Bizhub 950


Custom Search


hotfuser
11-21-2016, 06:02 PM
Please can someone help me.

I am having trouble loading firmware onto a new board (image process and OACB)

The ISWTrns tool will not let me install through USB.

I seem to remember that there needs to be an USB driver loaded on PC before sending firmware through ISWTrns.

This is not happening. All info would be much appreciated.

Synthohol
11-21-2016, 06:13 PM
I thought the connector was an let cable under the plate to the right side of the scanner glass.
It's been a while though.
Did you tell is you want to use USB instead of lpt? In one of the menus.

blackcat4866
11-22-2016, 01:29 AM
I don't remember what it looks like, but the connector you're looking for is on the print card, under a black sticker. I seem to recall it being a USB connection, and I do seem to recall a print driver being installed. It took several attempts of re-booting the MFP, then the laptop, to get the two to communicate. =^..^=

Synthohol
11-22-2016, 04:02 AM
hope this helps.

Custom Search