PDA

View Full Version : 283


Custom Search


uzicomp
11-25-2016, 11:02 AM
34858
I replaced the drum
I cleaned the corona
Changed
ds roll kit

Kapral
11-25-2016, 12:01 PM
You might have a problem with magnetic roller in developer section.

Synthohol
11-25-2016, 03:25 PM
drum and developer must be replaced together on the 3 series.
if not it creates a whole range of CQ issues.

blackcat4866
11-25-2016, 05:14 PM
I'll have to agree with the previous gentlemen. Those look like developer copies to me. Are they gritty? =^..^=

allan
11-25-2016, 06:06 PM
Do you have a hole in the inner dev seal?
Looks like arcing to me.
I am confused about the feed direction.

If it is in the feed direction its the mag roller. Wipe off the developer, if it is shiny that is your problem replace the dev tank.

uzicomp
11-26-2016, 05:33 PM
ty
i will check the tank developer
and l"ll tell

Woxner
11-26-2016, 09:48 PM
you must aslo reset the counter when replacing parts. after doing dev you must also run the tcr adjuustment

uzicomp
11-28-2016, 06:17 PM
I replaced the tank developer it works great
and I reset the counter
ty

blackcat4866
11-29-2016, 01:25 AM
Congratulations on your success. =^..^=

Custom Search