CopierNerd
11-29-2016, 05:03 PM
Hi,
I want to print A5 job on A4 paper. For this i have tried every option available but when the print comes out, one side is not printed about 4 to 6 mm area. I have tried scaling up to 130 to 140 %, Fit-to-printable area, full bleed, custom settings every option but the print is incomplete. one side is mis-printed. It can be any side up, down, left or right.
I have also tried this on different machines but the result is same. Any suggestion or advice from any expert would be helpful and appreciated! ???
waiting
kind regards,
Copier Nerd
I want to print A5 job on A4 paper. For this i have tried every option available but when the print comes out, one side is not printed about 4 to 6 mm area. I have tried scaling up to 130 to 140 %, Fit-to-printable area, full bleed, custom settings every option but the print is incomplete. one side is mis-printed. It can be any side up, down, left or right.
I have also tried this on different machines but the result is same. Any suggestion or advice from any expert would be helpful and appreciated! ???
waiting
kind regards,
Copier Nerd