View Full Version : Miscellaneous bizhub Press C1060L Fit-to-Printable area problem!

Custom Search

11-29-2016, 06:03 PM

I want to print A5 job on A4 paper. For this i have tried every option available but when the print comes out, one side is not printed about 4 to 6 mm area. I have tried scaling up to 130 to 140 %, Fit-to-printable area, full bleed, custom settings every option but the print is incomplete. one side is mis-printed. It can be any side up, down, left or right.

I have also tried this on different machines but the result is same. Any suggestion or advice from any expert would be helpful and appreciated! ???


kind regards,

Copier Nerd

11-29-2016, 06:36 PM
Is it a pdf?
Maybe try printing to PDF with the paper size you want to save it as or convert the job to the paper size you want if you can?

11-30-2016, 04:13 AM
The job is in PDF. I do not want to resize the original job according to the output size. I do not want to edit the job. I want that machine fit the job according ot the paper size, when i have selected "fit" option in printing preferences menu.

11-30-2016, 04:39 AM
does it have a Fiery?
have you tried a different driver or application to print it from?
Foxit reader does a splendid job of printing things adobe finds difficult if you want to try another safe PDF app.

Custom Search