View Full Version : Can I print via Parallel port or USB port on the KM6500
sscslg
11-30-2016, 05:54 AM
The video card on my KM Fiery is not being recognized. A new card is on the way but will take a bit of time.
I see a USB port and a parallel port on the KM6500 machine. Can anyone please let me know if I can print through any of these ports directly (without fiery) and how can I install the drivers.
Thank you for the help rendered in advance
Synthohol
11-30-2016, 05:56 PM
Sadly no.
There are no print capabilities on the c6500 without a fiery or the shity IC60x KM controller
Those ports are not for printing.
Sorry for the bad news.
sscslg
12-01-2016, 09:12 AM
Sadly no.
There are no print capabilities on the c6500 without a fiery or the shity IC60x KM controller
Those ports are not for printing.
Sorry for the bad news.
Oh! Seems like I am stuck until the new video card arrives.. Anyway...Thanks for the help.
jotunn
12-01-2016, 01:43 PM
The video card on my KM Fiery is not being recognized.
Are you sure that you've got broken video interface in your Fiery?
In case of IC-408 controller, when Windows cannot detect vx500 device (video interface) it's 95% broken mainboard - particulary broken solder joints in 6300ESB south bridge chip.
sscslg
12-01-2016, 02:49 PM
Are you sure that you've got broken video interface in your Fiery?
In case of IC-408 controller, when Windows cannot detect vx500 device (video interface) it's 95% broken mainboard - particulary broken solder joints in 6300ESB south bridge chip.
Yes ! I have made sure of that.. tested the video card on another fiery... does not detect there too. I have the IC 303 fiery system.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.