PDA

View Full Version : KM C550 - misfeed detected when a print job completes just before stapling


Custom Search


herbivore1
12-07-2016, 04:08 AM
I got a beautiful c550 from state auction. am a computer tech, have overhauled smaller laser printers. fairly new to bizhubs.

When printing multipage docs that will be stapled in upper corner (saddle stitch stapling goes ok...) when the printing is done it detects misfeed. this sometimes happens just before the last page joins the rest - but usualy when they are all together waiting to be stapled.

(Question: How do i determine what the error code is for a jam?)

The device worked flawlessly. Until i formatted the hard drive. then it always jammed until i told it there was a punch kit installed... works fine now except this one issue!

PS: I parted out a bizhub 250, kept just a few parts.. if anyone needs a doohicky off the carcass, you can have it for the shipping costs !

Peace,
Jason & Fischer Bender

Ocean Shores Tech (http://www.OceanShoresTech.com)

Ps:34952

Flash
12-07-2016, 04:56 AM
Does it actually have a hole punch? If it does there are some sensors in there that may need calibrating. If it does not have a hole punch you need to uninstall it in the service mode.

herbivore1
12-07-2016, 05:03 AM
Does it actually have a hole punch? If it does there are some sensors in there that may need calibrating. If it does not have a hole punch you need to uninstall it in the service mode.

yes, PK-512 in my fs-608 finisher

habik
12-07-2016, 07:14 AM
I'd say firmware re-flash should solve it.
Try 2 staples in middle or on the other side.

Byting on bits.

herbivore1
12-07-2016, 07:31 AM
I'd say firmware re-flash should solve it.
Try 2 staples in middle or on the other side.

Byting on bits.

Would love too...where can I gets me some firmware?

Also, how do I tell what the jam's error code is?
Thanks!

habik
12-07-2016, 07:37 AM
Enter service mode. Search for it on forum.


Sent from my iDon't believe in marketing device using Tapatalk

herbivore1
12-07-2016, 07:45 AM
Enter service mode. Search for it on forum.


Sent from my iDon't believe in marketing device using Tapatalk

I literaly have spent > dozen hours on google, browsing the menus, going through the 1800 page service manual... and have learned a lot... but i still need a hand on how to find the jam error codes ... not sure what is my glitch...
Please? :)

habik
12-07-2016, 08:04 AM
Counter > Jam


Sent from my iDon't believe in marketing device using Tapatalk

habik
12-07-2016, 08:06 AM
Utility/Counter
Check Details
Stop
00
Stop
01
Counter
Jam or Jam History


Sent from my iDon't believe in marketing device using Tapatalk

herbivore1
12-07-2016, 11:10 AM
Utility/Counter
Check Details
Stop
00
Stop
01
Counter
Jam or Jam History


Sent from my iDon't believe in marketing device using Tapatalk

on this printer it is called machine management list.
FOUND AND FIXED THE GREMLIN...
Error # led me to this via google:
http://www.copytechnet.com/forums/konica-minolta/68286-bizhub-c550-error-code-c-225b.html
Checked the DC PSU.... found... BAD BURSTED CAPS!!
1 HR 30 MIN LATER ITS FIXED.!!!
While I spend my work day and hobby time fixing stuff... this is my first industrial printer - its pristine (now) and cost me less than $90!
I AM SO BADASS!! ;)
LOL !
Please excuse my NOOB excitment ... ;)

THANK YOU!

habik
12-07-2016, 06:28 PM
on this printer it is called machine management list.
FOUND AND FIXED THE GREMLIN...
Error # led me to this via google:
http://www.copytechnet.com/forums/konica-minolta/68286-bizhub-c550-error-code-c-225b.html
Checked the DC PSU.... found... BAD BURSTED CAPS!!
1 HR 30 MIN LATER ITS FIXED.!!!
While I spend my work day and hobby time fixing stuff... this is my first industrial printer - its pristine (now) and cost me less than $90!
I AM SO BADASS!! ;)
LOL !
Please excuse my NOOB excitment ... ;)

THANK YOU!

Well done!

I must have missed the bit about you wanting machine reports.
:D

Albonline
12-07-2016, 08:17 PM
I literaly have spent > dozen hours on google, browsing the menus, going through the 1800 page service manual... and have learned a lot... but i still need a hand on how to find the jam error codes ... not sure what is my glitch...
Please? :)
look in manual, under soft switch settings, think its switch 11-7,but dont trust my memory, i dont!

Custom Search