PDA

View Full Version : Can't print Thick 4 in C452 , Why?


Custom Search


karim-tech
12-17-2016, 09:39 PM
in some C452 machines can't print on Thick 4

when i chose the right type of paper ,i can't print on thick paper 1, thick paper +1, thick paper 2,thick paper 3,thick paper 4.
but when i chose for exemple Paper ordinary and even if i put a thick paper 2 in the machine it's printing ,

i had this problem with a C451 and i resolve the problem by changing a small card in the machine and its working ,

thanks a lot

allan
12-18-2016, 05:21 AM
If the bypass(manual tray) works hard the plastic guide that forces the curve gets worn out.
Scraping it flat with a blade works or just replace the entire gray plastic piece.

These machines are bad at thick stock.

oops you mean its not jamming?

copier tech
12-18-2016, 11:20 AM
When you say "can't print" what exactly do you mean, the machine jams? or you get a "load correct paper type" message?

karim-tech
12-20-2016, 03:48 PM
hellooo

thx for interesting ,

that means it's given a jam with code 10-02

even if i use correct paper with the correct weight and size doesn't work .

i guess isn't about mechanical problem ;

i have the same problem once but only with the tick 4 and i resolve by changing the (EEPROM board ) but now doesn't work


thx a lot

karim-tech
12-20-2016, 05:41 PM
HIIIII


it's ok i change the all registration bloc and it's work now thx everbody .

thank a lot

Custom Search