Desert Rat
12-21-2016, 05:36 PM
This seemed odd to me, the toner bottle does not slide in nice and easy. As if it is to big around to fit.
When I try to turn the bottle is does not turn. The toner cover does not close easily either. It takes a tn-511 toner
and they showed me the box, but there are no markings on the bottle. Guess I'll have to take a ride to Precision roller
and have a look at the bottle.
I did vacuum out the hopper to see what was up. Didn't see anything that would be a problem. I found the sensor in there on the
upper left of the hopper. And the top has a thingy that moves, I assume that is the other sensor. Can't remember there names now.
The sensor on the upper left looked like it had a piece of felt in the groove, so I was able to move that and it does not look like it's
in the way. I did not find an interlock on the door in front of the toner bottle. Looks like the door panel for that flaky finisher has an interlock.
But the machine is not seeing the bottle as the message indicates, "remove toner bottle and install a new toner bottle". I think is what it said.
Has anyone else seen this?
When I try to turn the bottle is does not turn. The toner cover does not close easily either. It takes a tn-511 toner
and they showed me the box, but there are no markings on the bottle. Guess I'll have to take a ride to Precision roller
and have a look at the bottle.
I did vacuum out the hopper to see what was up. Didn't see anything that would be a problem. I found the sensor in there on the
upper left of the hopper. And the top has a thingy that moves, I assume that is the other sensor. Can't remember there names now.
The sensor on the upper left looked like it had a piece of felt in the groove, so I was able to move that and it does not look like it's
in the way. I did not find an interlock on the door in front of the toner bottle. Looks like the door panel for that flaky finisher has an interlock.
But the machine is not seeing the bottle as the message indicates, "remove toner bottle and install a new toner bottle". I think is what it said.
Has anyone else seen this?