View Full Version : bizhub C353 C-E002
hugohug
12-22-2016, 10:17 AM
dear all ,
i removed MFP board and reinstalled it again after fixing the network port
the first problem i faced is : serial number needs to be entered , and one of our technicians fixed it ,
but after that and just after turning on the printer i get the error C-E002 !
have you ever faced this problem , any suggestions on how to solve this would be appreciated
edit :
in service manual it says to try this :
Service Mode > State Confirmation > Memory HDD Adj. > Up Ver
but start button doesn't change to blue !
Gaffers01
12-22-2016, 02:51 PM
You probably need to tell the machine that the HDD is Installed and then try again.
Service mode>System 2>HDD change to installed.
i havent looked at this model for a few years but i think that is the process, like the newer machines.
EarthKmTech
12-23-2016, 02:06 AM
dear all ,
i removed MFP board and reinstalled it again after fixing the network port
the first problem i faced is : serial number needs to be entered , and one of our technicians fixed it ,
but after that and just after turning on the printer i get the error C-E002 !
have you ever faced this problem , any suggestions on how to solve this would be appreciated
edit :
in service manual it says to try this :
Service Mode > State Confirmation > Memory HDD Adj. > Up Ver
but start button doesn't change to blue !
You may need to format the hard drive.
Back when these machines were still in service this was a common problem on machines that had fax kits that were used heavily. Would need to be done once a week once a certain number of faxes were received in the life of the machine due to a firmware bug. Total initialisation fixed it when this started. Later versions of firmware may of fixed this but, we don't service them anymore so I don't know.
hugohug
01-04-2017, 04:17 PM
You probably need to tell the machine that the HDD is Installed and then try again.
Service mode>System 2>HDD change to installed.
i haven't looked at this model for a few years but i think that is the process, like the newer machines.
thank you for replying
i tried this and i could do the Memory HDD Adj. > Up Ver and the result is NG also i get the same error C-E002
35157
also when i reboot the machine i the hdd status changes back to not installed !
You may need to format the hard drive.
Back when these machines were still in service this was a common problem on machines that had fax kits that were used heavily. Would need to be done once a week once a certain number of faxes were received in the life of the machine due to a firmware bug. Total initialisation fixed it when this started. Later versions of firmware may of fixed this but, we don't service them anymore so I don't know.
thank you for replying
the HDD won't format , i changed with other one but still the same problem !
unfortunately i don't have a CF card to update the firmware or to initialize it !
Rvale
01-11-2017, 12:19 PM
had many of those myself, to start with: What you mean by fixing the netwok Port?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.