PDA

View Full Version : Jamming J72-19 FS-534 Konica Bizhub 654


Custom Search


dragonman
01-11-2017, 10:29 AM
Hi All,

Loosing the will to live with this fault, im getting an intermittent fault code of J72-19 on the smaller FS-534 finisher that only appears to happen after a long run of copies. the firmware is bang up to date and sensors changed (PS5 and PS4). it looks like its jamming at the entrance to the horizontal transport section straight after the exit from the turnaround unit. Anyone have any ideas or had something similar? ive checked all previous threads and nothing has worked so far.

Many thanks in advance.

blackcat4866
01-13-2017, 01:06 AM
Google works quite nicely to find this sort of information:

http://www.copytechnet.com/forums/konica-minolta/104455-fs-534-alignment-plate-wearing.html
=^..^=

Custom Search