PDA

View Full Version : C452 does not sense sometimes Finisher


Custom Search


apus824
01-22-2017, 09:39 AM
Hi!
I have a problem with a C452.It does not sense Fs527 finisher sometimes(cc. once a week).If I turn off and on the main switch,it will be good.:p
I have no idea what is the problem....maby the relay panel?
Please help me if you have some ideas!
Thank you!

MFPTech
01-22-2017, 02:12 PM
Hi!
I have a problem with a C452.It does not sense Fs527 finisher sometimes(cc. once a week).If I turn off and on the main switch,it will be good.:p
I have no idea what is the problem....maby the relay panel?
Please help me if you have some ideas!
Thank you!
Firmware update?

Sent from my SGH-I337M using Tapatalk

mx6turbo89
01-22-2017, 03:49 PM
Hi!
I have a problem with a C452.It does not sense Fs527 finisher sometimes(cc. once a week).If I turn off and on the main switch,it will be good.:p
I have no idea what is the problem....maby the relay panel?
Please help me if you have some ideas!
Thank you!

That can be a symptom of the DC Power Supply overheating. Try cleaning the often-overlooked DCPS cooling fan filter on the rear left side towards the bottom, then see if the problem returns. If so, replace the DCPS.

apus824
01-22-2017, 07:50 PM
Thank You!
I will try thats!

Woxner
01-23-2017, 02:57 AM
there is a board on the transport that goes bad

apus824
02-05-2017, 06:46 PM
there is a board on the transport that goes bad
Hi!Ihavebeenchanged the DCPS and the mashine works good,two weeks ago!
Thank you for your help!:cool:

Custom Search