PDA

View Full Version : Bizhub C1085 Vertical banding on all colors


Custom Search


Haroldbfix
01-23-2017, 03:34 PM
The bands are very close together. On an 11X17 page you would see probably 10-15 vertical bands. If you panic stop the machine you can see the bands on the belt. The bands are clearly noticeable on half tones but can be seen on solids as well if you look closely. Any Ideas?
Here are the parts recently replaced

4) Developer units (New style)
4) Developers
4) Coronas
4) Drums
1) transfer Belt and CYMK transfer rollers
1) 1st transfer drive motor
1) 2nd transfer drive motor

Swapped with another machine right next to it
!st transfer Unit
2nd transfer unit
Fuser

davidj7
03-28-2019, 12:46 PM
i am also facing the same issue. Did you figure out the problem on your machine?

Thanks

Haroldbfix
03-28-2019, 05:45 PM
i am also facing the same issue. Did you figure out the problem on your machine?

Thanks

There is a black LFR that helps but doesn't resolve it completely. We found that after dong a color linearization (max density, density balance etc...) that helped as well. So with both combinations we got it so its no longer an issue with the customer. And since we color linearize this particular printer after doing a pm the issue hasn't came back up. I hope this helps you.

davidj7
03-28-2019, 05:53 PM
I will update tomorrow . thanks for the response

davidj7
03-30-2019, 03:08 PM
result so far . did on the similar lines so far, lines faintly visible in certain colors . I am 100% sure its related to K .

Will update as I progress

Custom Search