PDA

View Full Version : Undo "Endless 90% Consumables" bizhub C452/552


Custom Search


MFPs R Now PCs
01-23-2017, 06:40 PM
We have Hex settings for the 3 soft switches to "turn on endless 90% consumables" on bizhub C452/552's. However we want to revert it back to the original settings so the machine will indicate "call for" new imaging units again and don't have those settings.

Turn ON is:

Switch 50
Hex 01

Switch 51
Hex fo

Switch 55
Hex oc

What are the settings to Revert/Turn OFF???

Thanks in advance!

copier tech
01-23-2017, 08:30 PM
Set the HEX settings back to 00 also the follow back to default.

System 1 > IU Life Stop Setting Set to "Normal"

Enter SE mode & Press Stop->0->Clear to enter “Enhanced Security mode” > Life Stop Setting Set to "Stop”

MFPs R Now PCs
01-23-2017, 08:44 PM
Set the HEX settings back to 00 also the follow back to default.

System 1 > IU Life Stop Setting Set to "Normal"

Enter SE mode & Press Stop->0->Clear to enter “Enhanced Security mode” > Life Stop Setting Set to "Stop”

So just make all 3 soft switch HEX values 00 ?

copier tech
01-24-2017, 07:24 AM
So just make all 3 soft switch HEX values 00 ?

Yes

MFPs R Now PCs
01-25-2017, 04:05 PM
Yes

Thank you for the clarification!

Grebom
03-30-2017, 10:36 PM
Will the life stop affect scanning to email and faxing?

Synthohol
03-31-2017, 01:41 AM
only when the machine locks out for the consumables.
you can still set to no stop in IU stop and yes to the reminders so when the IUs go EOL they can just hit ok and use the machine, the reminder is persistent though.

afterhours
04-01-2017, 11:00 PM
Set the HEX settings back to 00 also the follow back to default.

System 1 > IU Life Stop Setting Set to "Normal"

Enter SE mode & Press Stop->0->Clear to enter “Enhanced Security mode” > Life Stop Setting Set to "Stop”


This is correct.

Custom Search