Bizhub 206 SMB scan error codes

[dogsbody]

Hey all, I have a Bizhub 206 that refuses to scan SMB. The folders are shared correctly however no combination of file path username/password works. It does print a TX report with an error code, however I cannot find the errors listed in any manual. The errors are 0104 and 0115 depending on how I've set the scan up. If any one has a list of what these errors are and can share it'd be much appreciated. Thanks.

[Woxner]

Re: Bizhub 206 SMB scan error codes

is there a firewall stopping it. did you turn on file sharing in the network not just the file. also what os are you using.

[Gaffers01]

Re: Bizhub 206 SMB scan error codes

Here is the list of error codes hope this helps to narrow down the problem. Sorry the list looks a bit confuing where ive copied and pasted it but if there is a space next to the code it belongs to the Corrective action above

6.1Network error code list

Error code	Category	Contents of error	Cause	Corrective action
E100	Cannot connect	SMTP server	A connection with the server could not be established.	Make sure that the Ethernet cable is correctly connected. Check the function settings on the [E-MAIL SETTING 1], [EMAIL SETTING 2], and [NETWORK SETTING] menus. Ask the network administrator if the network is operating normally.
E101	POP3 server
E102	DNS server
E103	FTP proxy server
E104	SMB server
E105	NTP server
E11E	LDAP server
E106	Server error	FTP server error	Scanned data could not be properly uploaded to the FTP server or the SMB server.	Ask the network administrator if the network is operating normally.
E107	SMB server error
E108	Wrong password	FTP server	Login to the server failed due to a wrong password.	For the POP3 server, check the function settings on the [E-MAIL SETTING 2] menu. Ask the network administrator if the network is operating normally.
E109	SMB server
E10A	SMTP server
E10B	POP3 server
E10C	LDAP server
E10D	Server memory full	SMTP server	A memory overflow occurred in the SMTP server during E-mail transmission.	Ask the network administrator if the network is operating normally.
E11F	USB memory full	USB memory full	The memory capacity of the USB is less than the data size to be scanned.	Either increase the amount of available space by deleting files on the USB memory, or use another USB memory that has more available memory space.
E10E	Cannot get IP	DNS can’t get LDAP IP	An IP address could not be obtained from the DNS server.	Ask the network administrator if the network is operating normally.
E10F	DNS can’t get SMTP IP
E110	DNS can’t get POP3 IP
E111	DNS can’t get FTP IP
E112	DNS can’t get NTP IP
E113	Communication error	SMTP server	Communication with the server failed due to a problem in the main unit or unavailability of the network or server.	Check the communication result report. Ask the network administrator if the network is operating normally.
E114	FTP server
E115	SMB server
E116	POP3 server
E117	NTP server
E120	USB memory	Communication with the USB memory could not be established.	Check that the USB memory is connected correctly.

[dogsbody]

Re: Bizhub 206 SMB scan error codes

Thankyou,

Woxner, it is server 2012, I trust the IT company that set up the share. They have existing bizhub c280's and 223's that I was able to configure and get to work.

Gaffers01, thankyou but the specific errors I am getting are not listed, I'm was hoping for something a bit more specific so I can narrow down the error to something specific. The c280 would say something like "login error" as well as give me an error code that I could look up for something more specific.

Cheers.

[Gaffers01]

Re: Bizhub 206 SMB scan error codes

Instead of "0" the error codes are "E" in the service table above.
So 0104 is E104 and so on.