View Full Version : Bizhub 206 SMB scan error codes
dogsbody
02-08-2017, 08:36 AM
Hey all, I have a Bizhub 206 that refuses to scan SMB. The folders are shared correctly however no combination of file path username/password works. It does print a TX report with an error code, however I cannot find the errors listed in any manual. The errors are 0104 and 0115 depending on how I've set the scan up. If any one has a list of what these errors are and can share it'd be much appreciated. Thanks.
Woxner
02-08-2017, 11:05 AM
is there a firewall stopping it. did you turn on file sharing in the network not just the file. also what os are you using.
Gaffers01
02-08-2017, 11:08 AM
Here is the list of error codes hope this helps to narrow down the problem. Sorry the list looks a bit confuing where ive copied and pasted it but if there is a space next to the code it belongs to the Corrective action above:confused:
6.1Network error code list
Error code
Category
Contents of error
Cause
Corrective action
E100
Cannot connect
SMTP server
A connection with the server could not be established.
Make sure that the Ethernet cable is correctly connected.
Check the function settings on the [E-MAIL SETTING 1], [EMAIL SETTING 2], and [NETWORK SETTING] menus.
Ask the network administrator if the network is operating normally.
E101
POP3 server
E102
DNS server
E103
FTP proxy server
E104
SMB server
E105
NTP server
E11E
LDAP server
E106
Server error
FTP server error
Scanned data could not be properly uploaded to the FTP server or the SMB server.
Ask the network administrator if the network is operating normally.
E107
SMB server error
E108
Wrong password
FTP server
Login to the server failed due to a wrong password.
For the POP3 server, check the function settings on the [E-MAIL SETTING 2] menu.
Ask the network administrator if the network is operating normally.
E109
SMB server
E10A
SMTP server
E10B
POP3 server
E10C
LDAP server
E10D
Server memory full
SMTP server
A memory overflow occurred in the SMTP server during E-mail transmission.
Ask the network administrator if the network is operating normally.
E11F
USB memory full
USB memory full
The memory capacity of the USB is less than the data size to be scanned.
Either increase the amount of available space by deleting files on the USB memory, or use another USB memory that has more available memory space.
E10E
Cannot get IP
DNS can’t get LDAP IP
An IP address could not be obtained from the DNS server.
Ask the network administrator if the network is operating normally.
E10F
DNS can’t get SMTP IP
E110
DNS can’t get POP3 IP
E111
DNS can’t get FTP IP
E112
DNS can’t get NTP IP
E113
Communication error
SMTP server
Communication with the server failed due to a problem in the main unit or unavailability of the network or server.
Check the communication result report.
Ask the network administrator if the network is operating normally.
E114
FTP server
E115
SMB server
E116
POP3 server
E117
NTP server
E120
USB memory
Communication with the USB memory could not be established.
Check that the USB memory is connected correctly.
dogsbody
02-08-2017, 12:05 PM
Thankyou,
Woxner, it is server 2012, I trust the IT company that set up the share. They have existing bizhub c280's and 223's that I was able to configure and get to work.
Gaffers01, thankyou but the specific errors I am getting are not listed, I'm was hoping for something a bit more specific so I can narrow down the error to something specific. The c280 would say something like "login error" as well as give me an error code that I could look up for something more specific.
Cheers.
Gaffers01
02-08-2017, 03:02 PM
Instead of "0" the error codes are "E" in the service table above.
So 0104 is E104 and so on.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.