PDA

View Full Version : Konica 8031 PCL Driver suddently stopped working


Custom Search


lefty4080
08-02-2008, 04:14 AM
I am not sure what happened. I have both the PCL and PS drivers installed. They both print to the TCP port setup on my computer. I used the PCL drives when I am printing barcode as they dont print with PS driver.

Anyway I never had any problems, suddenly PCL driver does not work. When I print to it I get an error. I know it is a windows problem as my laptop works fine and still prints to the PCL driver.

Any ideas what is going on. I tried uninstalling the driver and reinstalling it, no help. I tried to download other drivers, no help either.

Any help would be great. Thanks

pepper38_cnd
08-02-2008, 02:00 PM
If your driver is corrupt you will have to completely remove it and do a fresh install.

From the printer folder click delete the PCL printer then click File-> Server Properties -> Drivers

Highlight the PCL driver and choose delete, either reboot or start and stop the print spooler. Then reinstall the driver.

You should now be printing again with PCL.

Custom Search