View Full Version : Minolta C452 alignment error A3
myster
03-01-2017, 08:30 AM
Hello
A4 printing is good
When printing in A3 there is an alignment error at the end of the copy
Clean laser, clean reg sensors
35774
Do you mean colour reg out?
myster
03-01-2017, 09:09 AM
Yes vertical is fine
Horizontal in rear print bad yelow cian and magenta
kingarthur
03-01-2017, 01:49 PM
try FW, had a similar problem & once I upgraded FW it sorted itself, when you do the FW.... DO NOT upgrade scanner FW
myster
03-01-2017, 03:25 PM
Solved !!
Change the speed of the fuser unit
Service mode machine: Fusing transport speed
Thank you:D
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.