Eugene74
03-02-2017, 10:44 AM
Good Day All,
We've been task to connect a machine (B287) with CSRC via Email (1-way communication), we've been given all the server settings (SMTP address and authentication credetials) the client need this to be connected via TSL protocol over port 25. We can't find any place to specify TSL protocol (like in scan to email, were this is available) and if we leave it on port 25 we get connection error and if we change it to 587 (default TSL port number) we also get a connection error. We went through the soft switched in the service manual and there are no switch to activate TSL or even a place were we could load a TSL certificate.
Does anyone else had such a problem before or could you please point s in the right direction.
Many thanks,
Eugene.
We've been task to connect a machine (B287) with CSRC via Email (1-way communication), we've been given all the server settings (SMTP address and authentication credetials) the client need this to be connected via TSL protocol over port 25. We can't find any place to specify TSL protocol (like in scan to email, were this is available) and if we leave it on port 25 we get connection error and if we change it to 587 (default TSL port number) we also get a connection error. We went through the soft switched in the service manual and there are no switch to activate TSL or even a place were we could load a TSL certificate.
Does anyone else had such a problem before or could you please point s in the right direction.
Many thanks,
Eugene.