PDA

View Full Version : C-3508 in c6500


Custom Search


Shinigami
03-02-2017, 10:57 PM
Hello i have the code c-3508 all time after 3 or 4 print page ! I switch the dipswitch 3-1 but the same error all time !

Shinigami
03-03-2017, 10:27 PM
Hello i have the code c-3508 all time after 3 or 4 print page ! I switch the dipswitch 3-1 but the same error all time !


helpppppp

Synthohol
03-04-2017, 12:15 AM
dude, get a manual.

Shinigami
03-04-2017, 06:04 AM
dude, get a manual.


I have the manuel ! I change the fusing uint ! Fusing board ! Dipswich !

Synthohol
03-04-2017, 12:46 PM
that info should have been in your first post man,


C-3508
Fusing roller paper winding
abnormality.

thats an odd one, what the hell does it even mean?
paper winding? seriously?

Shinigami
03-05-2017, 08:04 PM
that info should have been in your first post man,


C-3508
Fusing roller paper winding
abnormality.

thats an odd one, what the hell does it even mean?
paper winding? seriously?






But i change the fusing unit completely

tulintron
03-06-2017, 01:34 PM
I have the manuel ! I change the fusing uint ! Fusing board ! Dipswich !
If you change the fuser unit and the defect persists, being 3508 after 03 or 04 prints, your Face up and Face down, change paper types, simplex or duplex,
Leaf by leaf, increasing the amount gradually

I believe that after this, you will have news.

Custom Search