methogod
03-07-2017, 08:00 PM
Never seen the LD be so far apart...
PM was just done and DV. New charge unit was just put in.
Everything looks good as far as i can tell, prints ok too just worried.
Drum is at 380K of 1M, but we usually let them run long....
ideas?
35816
PM was just done and DV. New charge unit was just put in.
Everything looks good as far as i can tell, prints ok too just worried.
Drum is at 380K of 1M, but we usually let them run long....
ideas?
35816