PDA

View Full Version : Konica C284


Custom Search


Fuzzylogic
03-08-2017, 06:41 AM
Hello out there
My client has bought a used KM C284 from the auctions. I installed it on their network and all is O.K.except that the administrator password has been changed. I have tried the usual 12345678, 1234567812345678, 9272927292729272, password, etc but I cannot log in.Is there a way to reset the password back to default.

Regards

Fuzzylogic:confused:

kingarthur
03-08-2017, 08:30 AM
go into tech rep, the stop 0C

Elmo
03-08-2017, 09:07 AM
There is a firmware reset tool A145FW.TAR this will reset passwords to default

floody
03-08-2017, 10:07 AM
try user name: admin and password: admin or user name:admin with no password

service_man
03-27-2017, 08:36 AM
Go to service manual, and STOP 0C, and change the password.
Or replace FW..

Regards

Custom Search