PDA

View Full Version : BizHub 500 "Fusing unit need to be replaced"


Custom Search


alexxcopier
08-06-2008, 07:44 AM
Hello
i have a message "Fusing unit need to be replaced" the total counter is around 250k every maintance counter is cleared but this message still stay
any ideas ? is this a firmware bug ?

Thanks for any help

moonwalker3778
08-06-2008, 11:10 AM
Do this

enter in to service mode-touch system 1-touch initialization-touch counter data- u ll find Drum and Fixing-touch fixing-press start key.

hope it will fix the problem:)

big jase
08-06-2008, 06:24 PM
you will need firmware above ver 31 ,to clear counters
there was a bug in ver 30 were counter reset button was,nt there:)

alexxcopier
08-07-2008, 06:34 PM
Thanks guys
i'm very pleased everything works perfect. today i up to date f/w to 31 and looks Ok
thanks again u got beer from me :)

DadO
04-03-2009, 05:03 PM
LOL i thought that I did gone nuts since I couldnt reset fix. assy. and i know that i did it before....lol....and jes, i got ver 30..... THX

Custom Search