View Full Version : Konica minolta LCC LU-301
copyman
03-13-2017, 01:46 PM
Biz C454 recognizes the LU-301 but paper won't lift. Nothing moves. Checked all connectors & interlocks. Since there isn't much to these I suspect the board is bad? It had been working fine then this happened.
Any other ideas appreciated.
Thanks in advance
copyman
03-24-2017, 02:09 AM
Tried a different LU-301 and now the display shows jam when powered up (see pic) and won't reset. Put the original LU back on and same jam message. Disconnect the LU's and everything is fine, including feeding from base LCC (PC-410). Weird both LU's are doing same thing, not allowing jam to reset?
36123
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.