PDA

View Full Version : Konica 7075


Custom Search


Luther
08-07-2008, 10:24 PM
Wondering if anyone has seen this, Did a complete pm around 17k ago and now i have a problem with the cleanin unit "jumping " ,if i cheat the front door i can see the unit skipping , took apart the cleaning unit, checked all the bushings and gears, replaced the cleaning blade again .its almost like the drum and blade werent primed, but i used a ton of setting powder and still des it occassionally, any help appreciated

Luther
08-08-2008, 04:43 PM
Never mind i got it, too much play between the cleaning blade and the top of the shouldered screw that holds it in place,put a washer over the shoulder and tightened and it went away, thanks guys

JustManuals
08-08-2008, 06:27 PM
Another satisfied customer!:)

Custom Search