PDA

View Full Version : Jamming Document Feeder Jamming Help!!


Custom Search


pern2808
03-29-2017, 10:21 AM
Hi I have a customer with a Develop / Konica Minolta 224e with a DF-64 which when scanning/copying using the DF it is constantly jamming/stopping about 1cm before fully exiting the paper. This is regardless of whether scanning portrait or landscape, roughly stops the same distance on exit. Have replaced sensors and replaced rollers/pick up etc. The DF will be fine for about a day and then it happens again. Its driving me nuts. Any help would be appreciated.

service_man
03-29-2017, 11:45 AM
Did you try to initialize ADF with test chart? Stop position and white read?

pern2808
03-29-2017, 11:57 AM
Did you try to initialize ADF with test chart? Stop position and white read?

I haven't as of yet. But I am going back there this afternoon and will do that and let you know. Thank you.

blackcat4866
03-29-2017, 04:18 PM
Jam code?

pern2808
03-29-2017, 05:51 PM
Jam code?

Hi blackcat, always 25 jam code. After replacing the 200,000 maintenance set of pick up / separation rollers( 2nd time now) and doing an auto stop with the test chart that service_man suggested the issue has for now disappeared. (Disappeared after doing stop with test chart) then replaced rollers. FIngers crossed that will sort and I wont see that DF for a little while to come!! Thanks to all.

Custom Search