PDA

View Full Version : minolta 4000 m3


Custom Search


evest
08-11-2008, 03:05 PM
Hey,

I have a problem with ep 4000. Have plenty of time on these machines and this is the first time I've run into an M3 code. I reset memory and initialized the unit. went thru all the prescribed input to bring machine back after ram clear.

What is an M3 Code and what should i do?

deep
08-11-2008, 05:56 PM
Normally, no M3 Code for EP-4000.

It might be a power surge problem at the machine location or the power board had gone bad. If it is the case, ram board will be corrupted and gives some abnormal code.

cobiray
08-11-2008, 08:24 PM
Have you emptied and reset the counter for the collection bottle? My memory is failing me, so I don't remember if that's an M2 or M3 code. I know the di520/620 would throw an M5 when the pm was due, have you tried reseting the consumable counters and running f5?

Custom Search