View Full Version : Need picture or instructions c6500 paper exit
impimp329
04-19-2017, 04:18 PM
Hi, I was changing the paper exit rollers on a c6500 and the springs for the tension popped off. Anyone have a picture of how they go back together????
This is the assembly right after the paper exits the fuser. I can't seem to upload a picture
mrwho
04-19-2017, 07:52 PM
It's not everyday that I service those, but I'll try to take a picture if I happen to see one tomorrow.
Coptech
04-19-2017, 08:06 PM
36420
This is the old photo that I kept for emergencies. I had an 8050 that got it's wheels run off. Glad that machine is gone. There was a time I think I could have assembled the decurler roller assy in my sleep.
mrwho
04-19-2017, 08:07 PM
I honestly thought he was talking about those two ceramic rollers on the exit guide...
Coptech
04-19-2017, 08:09 PM
I honestly thought he was talking about those two ceramic rollers on the exit guide...
Hey, there is a very good possibility that I guessed wrong on what he was talking about. Time will tell I suppose.
impimp329
04-19-2017, 08:54 PM
Yes, it's the 2 ceramic rollers on the exit tray right after the fuser.
Synthohol
04-20-2017, 12:00 AM
just 3 springs and a clip
http://www.copytechnet.com/forums/attachments/konica-minolta/36426d1492642813-need-picture-instructions-c6500-paper-exit-exit-jpg
mrwho
04-21-2017, 03:32 PM
A colleague who happened to service one today took the time to take these snaps. Hope they help.
36448
36449
impimp329
04-21-2017, 08:15 PM
A colleague who happened to service one today took the time to take these snaps. Hope they help.
36448
36449
Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.